Configuring Input Screen Forms For Parameter Assignment - Siemens SINUMERIK 840D Programming Manual

1
12.97

1.4.3 Configuring input screen forms for parameter assignment

The SC.COM (Siemens cycles) and UC.COM (user
cycles) files provide the basis for configuring the
input screen form for parameter setting.
The syntax is identical for both files.
Explanation
The following is an example of the cycle header:
Name of help display
Cycle name
//C6 (CYCLE85) Boring 1
//
C6
(CYCLE85)
Boring 1
Cycle parameterization
(R/0 2/1/Return plane, absolute)[return plane/RTP]
Start
Variable type
Separator
Value range
Separator
Default value
Separator
Long text
End
Start option
Short text
Separator
Text in bitmap
End option
Instead of limiting a value range, it is possible to define
individual values by enumeration. These are then
selected for input using the toggle button.
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/840Di/810D Programming Guide Cycles (PGZ) – 11.02 Edition
1.4 Cycle support in program editor (SW 4.3 and higher)
Comments
Header detection for a cycle description
Name of the help display with a p added (C1 – C28 Siemens Cycles)
Name of the cycle. This name is also written to the NC program.
Comments (is not evaluated)
(
REAL
R
INTEGER
I
CHARACTER
C
STRING
S
/
Lower limit, blank, upper limit (e.g. 0 2)
/
one value (e. g. 1)
/
is output in the dialog line
)
[
appears in the parameterization screen form
/
Parameter name
]
1
General
1-31