Calling Cycle832 In The Hmi Menu Tree - Siemens SINUMERIK 840D Programming Manual

3
Milling Cycles
3.17 High Speed Settings – CYCLE832 (SW 6.3 and higher)

3.17.1 Calling CYCLE832 in the HMI menu tree

Description of parameters
Entry area Programs / Milling
>>
Soft key
is displayed.
Interactive screen form CYCLE832 on standard
interface
Machining (_TOLM)
• Finishing (default)
• Rough-finishing
• Roughing
• Deselection.
For variable _TOLM coding see Subsection 3.17.2, Parameters.
At "Machining deselection", the G commands or the
setting/machine data return to the value generated by the
machine manufacturer.
Tolerance (_TOL)
The tolerance of the axes (corresponds to MD 33100:
COMPRESS_POS_TOL[AX]) involved in machining. The
tolerance value is effective for G642 and for COMPCURV or
COMPCAD. If the machining axis is a rotary axis, the tolerance
value is written with a factor (default factor = 8) to MD 33100:
COMPRESS_POS_TOL[AX] of the rotary axis.
3-262
High Speed
Settings
à
SINUMERIK 840D/840Di/810D Programming Guide Cycles (PGZ) – 11.02 Edition
3
12.97
11.02
© Siemens AG, 2002. All rights reserved