Siemens SINUMERIK 840D Programming Manual page 52

1
General
1.6 Cycle support for user cycles (SW 6.2 and higher)
and the script files:
•
mcst_640.bat,
•
mcst_800.bat or
•
mcst1024.bat.
File cst.arj contains all the standard and user cycle
bitmaps. So you will have to link together the standard
cycle bitmaps and your own bitmaps.
Step sequence for creation
•
Copy all the files from directory \hmi_emb\tools into an
empty directory on a PC.
•
Create a subdirectory \bmp_file there.
•
Copy your own bitmaps *.bmp to this subdirectory
\bmp_file.
•
Depending on the resolution for which a cst.arj is being
created, start mcst_640.bat / mcst_800.bat or
mcst1024.bat.
•
The cst.arj that you create will then be in the same
directory as the generation tools.
cst.arj is then integrated in the HMI software as
described in Subsection 1.4.6.
References:
1-52
/BEM/, Operator's Guide HMI Embedded
/IAM/, HMI/MMC Installation & Start-Up
Guide
IM2 "Installation and Start-Up Guide HMI
Embedded"
SINUMERIK 840D/840Di/810D Programming Guide Cycles (PGZ) – 11.02 Edition
1
12.97
09.01
© Siemens AG, 2002. All rights reserved