Siemens SINUMERIK 840D Programming Manual page 43

1
12.97
08.99
Operator commands in the help display
Paging backward in the documentation.
Page
up
Paging forward in the documentation.
Page
down
Enables the jump to another piece of text
next
entry
included in the help display.
Enables the jump to a selected piece of
Go to
text.
Zoom the text in the help window.
Zoom +
Reduce the text in help window.
Zoom -
Return to the cycle screen form.
Exit
help
Contour input support
Free contour programming
Generate
contour
Starts free contour
programming for entering
assembled contour sections
(refer to References: /OG/,
Chapter 6).
Blueprint programming
Contour
1 line
Contour
2 lines
Contur
3 lines
These soft keys
support blueprints that are
possible with SW 5 or higher.
It consists of one or several straight lines with
contour transition elements in-between (radii,
chamfers). Each contour element may be
preassigned by means of end points or point and
angle and supplemented by a free DIN code.
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/840Di/810D Programming Guide Cycles (PGZ) – 11.02 Edition
1.5 Cycle support in program editor (SW 5.1 and higher)
1
General
1-43