3
12.97
11.02
Note on markers _M20 to _M37
Markers _M20 to _M37 are distinguished by kinematics
with two or one rotary axis. A distinction is also made
between automatic rotary axes (known to the NCU) and
manual rotary axes.
There is only ever one valid marker for the active swivel
data record. Control via parameter/GUD7 variable
_TC_ST.
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/840Di/810D Programming Guide Cycles (PGZ) – 11.02 Edition
3.16 Swiveling – CYCLE800 (SW 6.2 and higher)
3
Milling Cycles
3-255