Loading To The Control - Siemens SINUMERIK 840D Programming Manual

1
General
1.4 Cycle support in program editor (SW 4.3 and higher)

1.4.6 Loading to the control

Loading with MMC 100 / MMC 100.2
Precondition
The application diskette has already been installed
on your PC.
Sequence of operations
• Change to directory "INSTUTIL" in your
application path and start "APP_INST.EXE". The
selection menu for software installation is
displayed.
• Select menu option "Modify configuration". A
further selection menu appears. In this menu
select the option "Add *.* Files ...". As the file
name enter your graphics file path and file name
"CST.ARJ" in the input screen form.
• Press the Return key to confirm your input.
• Press Esc to return to the main menu where you
can transfer your software to the hardware.
Loading to MMC 102/103
Sequence of operations
The help displays for cycle support are located in the
directory
Interactive programming\DP help.
They are entered from the diskette in long format
using the operations
• "Data Management" and
• "Copy".
1-36
SINUMERIK 840D/840Di/810D Programming Guide Cycles (PGZ) – 11.02 Edition
1
12.97
© Siemens AG, 2002. All rights reserved