S70, S7A and S80 I/O Rack
Dimensions
Height
Width
Depth
1
Weight
(Base Rack)
Electrical
Temperature
Requirements
Humidity
Requirements
Noise Emissions
Clearances
Install/Air Flow
Maintenance of a proper service clearance should allow proper air flow.
Service
See "Service Clearances for System in an S70, S7A, or S80 I/O Rack."
1. Configuration dependent, base weight plus weight of drawers.
Service Clearances for System in an S70, S7A, or S80 I/O Rack
The amount of space needed by the units during service is indicated by large box of the footprint. For
complete specifications, see "S70, S7A and S80 I/O Rack."
For multiple racks placed side by side, the left and right service clearances apply only to the leftmost and
rightmost rack.
Note: If you are planning to install an S70, S7A or S80 in an RS/6000 SP System environment, see
RS/6000 SP Planning Volume 1, Hardware and Physical Environment (GA22-7280) for system
planning information.
54
Site and Hardware Planning Information
1577 mm
650 mm
1019 mm
159 kg
(see specifications for drawers or enclosures)
(see specifications for drawers or enclosures)
(see specifications for drawers or enclosures)
(see specifications for drawers or enclosures)
Front
Back
62.0 in.
25.5 in.
40.1 in.
349 lbs.
Left
Right