Rack-Type System Internal Power Distribution Cable - IBM RS/60000 Series Site And Hardware Planning Information

PDU Power Cord
Feature Feature
Code Code
9171
6171
9822
9176
7176
9171
6171
9826
9176
7176
9171
6171
9835
9176
7176

Rack-Type System Internal Power Distribution Cable

The ac power distribution from PDUs to system components is accomplished with cords using IEC
320/C14 plugs. Additional cords for customer-installed equipment can be provided by feature code 6095.
Voltage from the PDU will be 200 to 240 volts as provided by the customer's ac power system. The plug
and output connector for power cable feature code 6095 are shown in the following table.
Feature Code
6095
Power Cord
PDU Plug
Receptacle to PDU
Plug
Power Cord Plug to
Wall
Standard Compliance or Type
IEC 320/C14
250 V, 10 A
This plug is used for all power outlets from a PDU.
IEC 320/C13
250 V, 10 A
For connection to customer installed equipment
Chapter 11. Power Cords and Electrical Needs
Standard
Compliance or
Type
Wilco Weatherproof
WIP130
250 V, 30 A
PDL Insulated
56PA330
250 V, 30 A
Korean Standard
KS C 8305-1990
250 V, 30 A
345