7040 Eserver Pseries 670; Eserver Pseries 670 Doors And Covers - IBM RS/60000 Series Site And Hardware Planning Information

7040 Eserver pSeries 670

The Eserver pSeries 670 system consists of multiple components, as summarized in the following table.
Model
7040-61R
FC6070
FC6074
FC6075
FC6200 or FC6201
7040-671
FC7315
FC8692
7040-61D
Notes:
1. Either slimline doors or acoustical doors must be selected by the customer during the order process. Slimline
doors will not meet acoustic limits for Category 1A.
2. Door options determine which doors are included with your Eserver pSeries 670. See "Eserver pSeries 670
Doors and Covers."

Eserver pSeries 670 Doors and Covers

Covers are an integral part of the Eserver pSeries 670 and are required for product safety and EMC
compliance. The following rear door options are available for the Eserver pSeries 670:
v "Enhanced Acoustical" Cover Option
This feature provides a low-noise option for customers or sites with stringent acoustical requirements
and where a minimal system footprint is not critical. The Acoustical cover option consists of a special
rear door which is approximately 200-mm (8 in.) in depth and contains acoustical treatment that lowers
the noise level of the machine by approximately 6 dB compared to the non-acoustical rear door. With
this option, the 7040 meets the acoustical Specifications for Category 1A for Data Processing Areas,
with a declared A-weighted sound power level, L
configuration.
v "Slimline" Cover Option
This feature provides a smaller-footprint and lower-cost option for customers or sites where space is
more critical than acoustical noise levels. The Slimline cover option consists of rear door which is about
50-mm (2 in.) in depth with no acoustical treatment. With this option, the 7040 has a declared
A-weighted sound power level, L
Note: For declared levels of acoustical noise emissions, refer to "Acoustical Noise Emissions" on page
136.
126
Site and Hardware Planning Information
Description
Base Frame (Redundant power supplies as
feature codes)
Base Frame Universal Front Door
Base Frame Slimline Rear Door
Base Frame Acoustical Rear Door
Optional Integrated Battery Feature (IBF)
Managed Server (up to 16 processors, 4 GB to
256 GB memory)
Hardware Management Console (HMC)
Media Subsystem (Operation panel, 3.5-inch
floppy drive, optional media devices)
IO Subsystem (20 PCI cards maximum, 16
DASD maximum)
, of 7.9 bels (B) for the most common system configuration.
WAd
Minimum per
2
2
of 7.5 bels (B) for the most common system
WAd
Maximum per
System System
1 1
1 1
1 1
1 1
1 1
1 1
0 2
1 1
0 2
1 1
1 3