7014 Rack; Model T00 Rack - IBM RS/60000 Series Site And Hardware Planning Information

7014 Rack

Model T00 Rack

Dimensions
Height
Capacity
With PDP - DC only
Width without side
panels
With side panels
Depth with rear door
only
Depth with rear door
and RS/6000 style
front door
pSeries (sculptured)
style front door
Weight
Base Rack
Full Rack¹
Electrical²
DC Rack
Power source loading
maximum in kVA³
Voltage range (V dc)
AC Rack
Power source loading
maximum in kVA (per
PDB)⁴
Voltage range (V ac)
Frequency (hertz)
Temperature
Requirements
Humidity
Requirements
Noise Emissions
Clearances
Install/Air Flow Rack airflow requirements are a function of the number and type of drawers installed (see 5
on page 32). Refer to the individual drawer specifications.
Service
See "T00 and T42 Rack Weight Distribution and Floor Loading" on page 35.
(see specifications for drawers or enclosures)
(see specifications for drawers or enclosures)
(see specifications for drawers or enclosures)
Front
915mm(36 in) 915mm(36 in)
1804 mm 71.0 in.
36 EIA Units
1926 mm 75.8 in.
623 mm 24.5 in.
644 mm 25.4 in.
1042 mm 41.0 in.
1098 mm 43.3 in.
1147 mm 45.2 in.
244 kg 535 lbs
816 kg 1795 lbs
(sum specified values for
drawers or enclosures in rack)
8.4
-40 to -60
4.8
200 to 240
50 or 60
Back Left
915mm(36 in)
Chapter 2. Physical Characteristics of Systems
Right
915mm(36 in)
31