Chapter 5. Physical Characteristics Of The 2100 Series; 2101, 2102, And 2103 Fibre Channel Raid Storage Subsystem; 2101 Model 100 Seascape Solution Rack - IBM RS/60000 Series Site And Hardware Planning Information

Chapter 5. Physical Characteristics of the 2100 Series

This chapter provides the physical characteristics for the 2100 series of external devices. The following
information can help you plan for your external devices. You need only do physical planning for the
devices you have ordered.
Note: Footprints are not drawn to scale. Where a footprint is shown, the figure represents a top view of
the device.

2101, 2102, and 2103 Fibre Channel RAID Storage Subsystem

2101 Model 100 Seascape Solution Rack

Dimensions
Height
Width
Depth
Weight (empty)
Electrical
Power source loading:
Maximum operating
Voltage range (V ac)
Frequency (hertz)
Thermal output
(Maximum)
Maximum altitude
Temperature
Requirements
Humidity
Requirements
(Noncondensing)
Wet Bulb
Noise Emissions*
L
WAd
L
pAm
<L >
pA m
Impulsive or
prominent discrete
tones
Clearances
Install/Air Flow Maintenance of a proper service clearance should allow proper air flow.
Service
* See "Noise Emission Notes" on page 336 for definitions of noise emissions positions.
Operating
10 to 40°C
(50 to 104°F)
Operating
8% to 80%
27°C (80°F)
Operating
6.6 bels
N/A
NA dBA
N/A
Front
915mm(36 in) 915mm(36 in)
1580 mm 62.0 in.
650 mm 25.5 in.
1030 mm 36.0 in.
40.5 in.
160 kg 352 lbs.
2.7 kVA
200 to 240
50 or 60
9250 Btu/hr
2135 m (7000 ft.)
Back
915mm(36 in)
Non-Operating
10 to 52°C
(50 to 125°F)
Non-Operating
8% to 80%
27°C (80°F)
Idle
NA bels
N/A
NA dBA
N/A
Left Right
915mm(36 in)
229