7015 Scsi Disk And Device Drawers - IBM RS/60000 Series Site And Hardware Planning Information

7015 SCSI Disk and Device Drawers

Dimensions
Height
Width
Depth
Weight
Minimum
Maximum
Electrical
Power source loading
(typical in kVA)
Voltage range (V ac)
Frequency (hertz)
Thermal output
(typical)
Power requirements
(typical)
Power factor
Inrush current*
Maximum altitude
Temperature
Requirements
Humidity
(Noncondensing)
Without tape drive
With tape drive
Wet Bulb
Requirements
Without tape drive
With tape drive
Noise Emissions
Data included with calculations for the 7015 POWERservers.
* Inrush currents occur only at initial application of power, no inrush occurs during normal power off-on cycle.
171 mm
443 mm
686 mm
25 kg
48 kg
200 to 240
580 Btu/hr
170 watts
0.5 to 0.7
2135 m (7000 ft.)
Operating
10 to 40°C
(50 to 104°F)
Operating
8 to 80%
20 to 80%
27°C (80°F)
23°C (73°F)
6.7 in.
(4 EIA units)
17.4 in.
27.0 in.
55 lbs.
105 lbs.
0.34
50 or 60
39 amps
Non-Operating
10 to 52°C
(50 to 125°F)
Non-Operating
8 to 80%
20 to 80%
27°C (80°F)
27°C (80°F)
Chapter 2. Physical Characteristics of Systems
39