7315-Cr2 Hardware Management Console (Hmc) - IBM RS/60000 Series Site And Hardware Planning Information

7315-CR2 Hardware Management Console (HMC)

The HMC is a user interface that provides the functions needed to create and maintain a
multiple-partitioned environment. The interface allows you to directly manipulate HMC-defined objects and
learn more about detected changes in hardware conditions. The HMC also provides service technicians
with diagnostic information for systems that can operate in a multiple-partitioned environment.
The 7315-CR2 Hardware Management Console (HMC) mounts in a 19-inch system rack. The IBM
7014-T00 and 7014-T42 racks are recommended. These racks operate with a voltage range of 200 V ac
to 240 V ac. For additional information about these racks, refer to "7014 Rack" on page 31.
Dimensions
Height
Width
Depth
Weight
Electrical
Power source loading
Input Voltage
Frequency (hertz)
Thermal output (minimum)
Thermal output (maximum)
Maximum altitude
Air Temperature
Requirements
Humidity Requirements
(Noncondensing)
Noise Emissions¹
L
WAd
Note: See "Noise Emission Notes" on page 336 for definitions of noise emissions positions.
Operating
10 to 35°C
(50 to 95°F)
at altitude 0 m to 914 m (2999 ft.)
10 to 32°C
(50 to 89.6°F)
at altitude 914 m (2999 ft.) to 2133 m (6998 ft.)
Operating
8% to 80%
Operating
6.5 bels
Chapter 3. Physical Characteristics of Hardware Management Consoles (HMC)
44 mm (1.7 in.)
440 mm (17.3 in.)
653 mm (25.7 in.)
12.9 kg (28.4 lbs.)
0.11 kVA to 0.35 kVA
100 V ac to 127 V ac
200 V ac to 240 V ac
50 Hz to 60 Hz
375 Btu/hr. (110 watts)
1195 Btu/hr. (350 watts)
2134 m (7,000 ft.)
Non-Operating
10 to 43°C
(50 to 110°F)
Non-Operating
8% to 80%
Idle
6.5 bels
219