Footprint Example - IBM RS/60000 Series Site And Hardware Planning Information

Footprint Example

The following table provides footprint dimensions for systems or devices for which they are appropriate. If
you want to use full-sized footprints of the system units or devices, use the measurements provided to
construct them out of folded newspaper or sheets of construction paper. You can then use them to plan a
layout within the actual office space.
Each footprint represents a top view of the system unit or device. All dimensions given include air flow but
not service accessibility.
The following example illustrates the use of a footprint. This illustration uses the 7006 Graphics
Workstation Models 41T, 41W, 42T, and 42W for the example.
1
Footprint
Desktop
Deskside
Note 1. The amount of space needed by the unit during normal operation is indicated by the footprint dimensions.
The following figure shows the space for the system, as well as required clearances.
497 mm (19.6 in.)
Desktop Footprint
497mm (19.6 in)
215mm (8.5 in)
215 mm (8.5 in.) wide
537 mm
(21.1 in.)
Deskside Footprint Includes Pedestal
Width
537 mm
(21.1 in.)
Chapter 1. Site Planning and Preparation Overview
Depth
537mm (21.1 in)
537mm (21.1 in)
7