IBM RS/60000 Series Site And Hardware Planning Information page 146

3-Phase Supply Voltage (50/60 Hz)
Customer Circuit Breaker Rating (see
Note 1 below)
Cord Information
Recommended Receptacle
Notes:
1. The exact circuit breaker ratings may not be available in all countries. Where the specified circuit breaker ratings
are not acceptable, use the nearest available rating. Use of a time delayed circuit breaker is recommended.
2. IBM strongly recommends the use of a metal backbox with line cords using IEC-309 plugs. For additional
information about this recommendation, see Chapter 11, "Power Cords and Electrical Needs," on page 337.
The following table illustrates the line cord options for the Eserver pSeries 670 with their geographic,
breaker rating, and cord information when the input power source is single-phase alternating current.
1-Phase Supply Voltage (50/60 Hz)
Geography
Customer Circuit Breaker Rating (see
Note 1 below)
Cord Information
Recommended Receptacle
Notes:
1. The exact circuit breaker ratings may not be available in all countries. Where the specified circuit breaker ratings
are not acceptable, use the nearest available rating. Use of a time delayed circuit breaker is recommended.
2. 380-415V line cord is not an orderable feature. Contact your local marketing representative for ordering
information.
3. IBM strongly recommends the use of a metal backbox with line cords using IEC-309 plugs. For additional
information about this recommendation, see Chapter 11, "Power Cords and Electrical Needs," on page 337.
Line Cord Features
The following three-phase line cord features are available for the Eserver pSeries 670:
v FC 8678: Line Cord, 200-240V ac, 6AWG, 14ft, IEC309 60A Plug
v FC 8681: Line Cord, 200-240V ac, 6AWG, 6ft, Chicago IEC309 60A Plug
v FC 8677: Line Cord, 380-415V ac, 8AWG, 14ft, No Plug
v FC 8680: Line Cord, 480V ac, 10AWG, 14ft, IEC309 30A Plug
v FC 8682: Line Cord, 480V ac, 10AWG, 6ft, Chicago, IEC309 30A Plug
The following single-phase line cord features are available for the Eserver pSeries 670:
v FC 8683: Line Cord, 200-240 V ac, 8AWG, 14ft, IEC309 40A Plug, Single Phase
v FC 8684: Line Cord, 200-240V ac, 8AWG, 6ft, Chicago, IEC309 40A Plug, Single Phase
v FC 8685: Line Cord, 200-415V ac, 8AWG, 14ft, No Plug, Single Phase
128
Site and Hardware Planning Information
200-240 V 380-415 V
60 A 30 A
6 and 14 foot, 6 AWG 14 foot, 6 or 8 AWG
line cord line cord, (electrician
installed)
IEC309, 60 A, type Not specified,
460R9W (not provided) electrician installed
200-240 V 200-240 V
United States, Canada, Europe, Middle East,
Japan Africa, Asia Pacific
40 A 40 A
6 and 14 foot, 8 AWG 14 foot, 8 AWG line
line cord cord, (electrician
installed)
IEC309, 60 A, type Not specified,
360R6W (not provided) electrician installed
480 V
30 A
6 and 14 foot, 10 AWG
line cord
IEC309, 30 A, type
430R7W (not provided)
380-415 V
Europe, Middle East,
Africa, Asia Pacific
25 A
14 foot, 10 AWG line
cord, (electrician
installed)
Not specified,
electrician installed