Eserver Pseries 655 Physical Specifications And Loads - IBM RS/60000 Series Site And Hardware Planning Information

If your installation is not using a grounded-raised floor, and your servers are connected to an 9076 SP
Switch2 clustered environment, all attached server frames in your environment must be independently
grounded to the switch frame. Use the following information to help you install multiple systems to the
9076 SP Switch2 switch frame in a clustered environment:
v Order grounding straps by calling the IBM Quality Hotline at 1-800-IBM-LINE and requesting Part
Number 44P3695, Grounding Kit. Each kit contains one ground strap and the required hardware to
make a single connection between a server and a 9076 SP Switch2, so order one kit for each server
that is connected to the switch.
v An IBM service representative will install the grounding straps by using instructions that are provided
with the grounding kits. Each server frame must be directly connected to a 9076 SP Switch2 frame.

Eserver pSeries 655 Physical Specifications and Loads

The following tables illustrate the physical, electrical and thermal, as well as acoustical and environmental
characteristics of various Eserver pSeries 655 system configurations.
Dimensions and Weight
Physical Characteristic
Height
Width
Depth
Weight without IBF (max. config.)
Weight with IBF (max. config.)
Notes:
1. Doors are not installed during product shipment to the customer.
2. Refer to the following table for the approximate weight of your system configuration.
Approximate System Weights by Configuration
If the system that you order weighs more than 1134 kg (2500 lbs) when it is shipped from the factory, a
weight-distribution plate will be provided for the system. This plate is used to minimize the point loading
from casters and leveling pads.
Number of
Nodes, I/O
Slim Doors
Drawers
with IBF
1, 0 616 (1359)
2, 0 665 (1467)
3, 0 740 (1631)
4, 0 9016 (1986)
5, 0 975 (2150)
6, 0 1136 (2505)
7, 0 1211 (2669)
8, 0 1260 (2777)
9, 0 1334 (2941)
10, 0 1383 (3049)
11, 0 1457 (3212)
12, 0 1506 (3320)
94
Site and Hardware Planning Information
Slimline Doors
2028 mm (79.84 in.)
785 mm (30.91 in.)
1443 mm (56.81 in.)
1487 kg (3279 lbs.)
1629 kg (3592 lbs.)
Weight in kg (lbs)
Slim Doors Acoustic
without IBF Doors with
IBF
528 (1165) 625 (1379)
577 (1273) 674 (1487)
652 (1436) 749 (1651)
724 (1596) 910 (2005)
798 (1760) 984 (2169)
871 (1920) 1145 (2524)
945 (2084) 1219 (2688)
994 (2192) 1268 (2796)
1069 (2356) 1343 (2960)
1118 (2464) 1392 (3068)
1192 (2628) 1466 (3232)
1241 (2736) 1515 (3340)
Acoustical Doors
2028 mm (79.84 in.)
785 mm (30.91 in.)
1799 mm (70.83 in.)
1496 kg (3299 lbs.)
1638 kg (3612 lbs.)
Acoustic No Doors with
Doors without IBF
IBF
537 (1184) 590 (1301)
586 (1292) 639 (1409)
660 (1456) 714 (1573)
733 (1616) 875 (1928)
807 (1780) 949 (2092)
880 (1940) 1110 (2447)
954 (2103) 1184 (2611)
1003 (2211) 1233 (2719)
1077 (2375) 1308 (2883)
1126 (2483) 1357 (2991)
1201 (2647) 1431 (3154)
1250 (2755) 1480 (3262)
No Doors
502 (1107)
551 (1215)
625 (1378)
698 (1538)
772 (1702)
845 (1862)
919 (2026)
968 (2134)
1042 (2298)
1091 (2406)
1166 (2570)
1215 (2678)