Four-port, 2-Viewer 3D (1080p 120Hz connection)
Troubleshooting
For assistance with common issues, refer to the following troubleshooting topics.
Content is not displaying on the screen
The glasses are turned on and functioning but content is not appearing on the screen.
Solution:
1. Make sure the projector is in Christie View mode.
2. Make sure the Christie View cable is seated correctly on the projector and the RF emitter(s)
are seated correctly for each mini-DIN3 connector on the cable.
Image tear appearing on the screen
The screen shows a different frame of video than what is shown on the bottom portion of the screen.
Mirage SST User Guide
020-102993-06 Rev. 1 (10-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
Setting up Christie View
59