Section 5 Using Keys To Move Around In The Programs; Table 1-1 Keys For Entering Data (Sl1000) - NEC SL1000 Programming Manual

SL1000/SL1100
To save a customer's database, a blank Compact Flash (CF) Card is required. Insert the CF Card into the CPU
and, using Program 90-03, save the software to the CF Card. (Program 90-04 is used to reload the customer
data if necessary.) Note that a CF Card can only hold one customer database. Each database to be saved re-
quires a separate drive.
S 5 USING KEYS TO MOVE AROUND IN THE
ECTION
PROGRAMS
Once you enter the programming mode, use the keys in the following chart to enter data, edit data and
move around in the menus.
When you want to ...
Enter Data into program
Next Index
Prior Index
Select Data
All Clear
Register
Go Back to Prior Screen
Move Cursor Jump Up/Down
Delete single character
Next Page
Toggle between Number/Character
While in a Entering Number
Prior Page
Quit the programming
Move Cursor to Left
Change Program Number
Change Index Number
1-4
CF card

Table 1-1 Keys for Entering Data (SL1000)

CPU card
CF Slot (CN2)
VMDB-C1
Telephone Programming
0 ~ 9, , #, Line Key (1 ~ 6)
*
Cursor Key (Up)
Cursor Key (Down)
Line Key (1 ~ 6)
Flash
Hold
Enter
Mute
Clear / Back
DND or DND / CONF
Clear / Back
-
Help
-
Speaker
Exit
Cursor Key (Left)
-
ISSUE 1.0
Introduction