S6 Factory Data; Description; Product Firmware Identification - GE MM3 Instruction Manual

4 SETPOINTS

4.7 S6 FACTORY DATA

]] SETPOINTS
]] S6: FACTORY DATA
This page contains information about the version of the MM3 and data for GE Power Management service
technicians. Setpoints Page 6 is divided into three sections: PRODUCT FIRMWARE IDENTIFICATION;
PRODUCT MODEL IDENTIFICATION, and FACTORY SERVICE DATA.
]] SETPOINTS
]] S6: FACTORY DATA
PATH: SETPOINTS MMMMMM S6 FACTORY DATA M PRODUCT FIRMWARE IDENTIFICATION
MOD NUMBER(S): 000
MESSAGE
MOTOR MANAGER 3
MESSAGE
VERSION: X.XX
BOOT PROGRAM
MESSAGE
VERSION: X.XX
DISPLAY PROGRAM
MESSAGE
VERSION: X.XX
SUPERVISOR PROGRAM
MESSAGE
VERSION: X.XX
MM3 HARDWARE
MESSAGE
REVISION: X.XX
GE Power Management
] PRODUCT FIRMWARE
MESSAGE
] IDENTIFICATION
] PRODUCT MODEL
MESSAGE
] IDENTIFICATION
] FACTORY SERVICE
] DATA
MESSAGE
Range: for identification only
If the MM3 has been modified so that it is no longer a standard model, a
modification number will be displayed in this message.
Range: for identification only
This message identifies the MM3 main firmware version.
Range: for identification only
This message identifies the MM3 Boot Program version.
Range: for identification only
This message identifies the MM3 Display Program version (when the
display option has been ordered).
Range: for identification only
This message identifies the MM3 Supervisor Program version.
Range: for identification only
This message identifies the Hardware revision the currently loaded
firmware was compiled for.
MM3 Motor Manager 3
4.7 S6 FACTORY DATA

4.7.2 PRODUCT FIRMWARE IDENTIFICATION

4.7.1 DESCRIPTION

4
4-33