Interlock Names - GE MM3 Instruction Manual

Motor manager 3
Hide thumbs Also See for MM3:
Table of Contents

Advertisement

4 SETPOINTS
PATH: SETPOINTS MMM S3 PROCESS MM INTERLOCK NAMES
PROCESS INTLK A NAME:
PROCESS INTERLOCK A
MESSAGE
PROCESS INTLK B NAME:
MESSAGE
PROCESS INTERLOCK B
PROCESS INTLK C NAME:
MESSAGE
PROCESS INTERLOCK C
PROCESS INTLK D NAME:
MESSAGE
PROCESS INTERLOCK D
PROCESS INTLK E NAME:
MESSAGE
PROCESS INTERLOCK E
PROCESS INTLK F NAME:
MESSAGE
PROCESS INTERLOCK F
PROCESS INTLK G NAME:
MESSAGE
PROCESS INTERLOCK G
PROCESS INTLK H NAME:
MESSAGE
PROCESS INTERLOCK H
PROCESS INTLK I NAME:
MESSAGE
PROCESS INTERLOCK I
PROCESS INTLK J NAME:
MESSAGE
PROCESS INTERLOCK J
INTLK COUNTER NAME:
MESSAGE
INTERLOCK COUNTER
INTLK COUNTER UNITS:
MESSAGE
UNITS
GE Power Management
Range: 20 alphanumeric characters
The MM3 allows the programming of user defined names for the
process interlock functions. To store a name, use the
keys to change the cursor to the desired letter or number. Press the
STORE
key. This stores the character and moves the cursor to the next
position. Repeat this sequence until the entire message has been
entered. One of the characters is a space. This can be used to replace
characters if no new character is required. If the cursor is at the end of
the message, pressing
STORE
first position. This message will now appear on any actual values
message relating to process interlock A.
Range: 20 alphanumeric characters
See PROCESS INTERLOCK A NAME.
Range: 20 alphanumeric characters
See PROCESS INTERLOCK A NAME.
Range: 20 alphanumeric characters
See PROCESS INTERLOCK A NAME.
Range: 20 alphanumeric characters
See PROCESS INTERLOCK A NAME.
Range: 20 alphanumeric characters
See PROCESS INTERLOCK A NAME.
Range: 20 alphanumeric characters
See PROCESS INTERLOCK A NAME.
Range: 20 alphanumeric characters
See PROCESS INTERLOCK A NAME.
Range: 20 alphanumeric characters
See PROCESS INTERLOCK A NAME.
Range: 20 alphanumeric characters
See PROCESS INTERLOCK A NAME.
Range: 20 alphanumeric characters
This setpoint allows defining the name of the interlock counter. See
PROCESS INTERLOCK A NAME for directions on entering characters.
Range: 20 alphanumeric characters
This setpoint allows defining the units of the interlock counter. See
PROCESS INTLK A NAME for directions on entering characters.
MM3 Motor Manager 3
4.4 S3 PROCESS

4.4.3 INTERLOCK NAMES

VALUE
causes the cursor to wrap around to the
/
VALUE
4
4-23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Motor manager 3

Table of Contents