Checking If Installation/Upgrade Is Required - GE MM3 Instruction Manual

8.1 OVERVIEW
If MM3PC is already installed it may require upgrading. Run the software and follow the procedure below:
1. While MM3PC is running, insert the GE Power Management Products CD and allow it to autostart (alter-
nately, load the index.htm file into your web browser) OR
Go to the GE Power Management website at www.GEindustrial.com/pm (preferred method).
2. Select the Software menu item then select MM3 Motor Manager 3 from the list of products.
3. Verify that the software version shown on this page is identical to the installed version as shown below.
Select the Help > About MM3PC menu item to determine which version is installed on the local PC.
8
8-2

8.1.3 CHECKING IF INSTALLATION/UPGRADE IS REQUIRED

MM3 Motor Manager 3
8 MM3PC SOFTWARE
No upgrade is required
if these two numbers match
GE Power Management