Table of Contents
Advertisement
8.4 USING MM3PC
The following example shows how to view and trend MM3 actual values.
1. Establish communications with the MM3 unit and select the Actual > Statistics menu item. This opens the
window showing the relevant monitored values. These values are continuously updated while the window
is open.
2. The MM3PC trending feature can be used to plot measured parameters. The following values can be
trended:
Phase currents ( I
•
analog input, voltage, and power.
3. Select the Actual > Trending menu item to open the trending window (see figure on following page).
Press the Setup button on the lower left of the window to enter the Graph Attribute page.
8
8-10
, I
, I
), ground current ( I
a
b
c
MM3 Motor Manager 3
8.4.5 VIEWING ACTUAL VALUES
), motor load, thermal capacity, current unbalance,
gnd
8 MM3PC SOFTWARE
GE Power Management
Advertisement
Table of Contents
