4.2 S1 CONFIGURATION
PATH: SEPOINTS M S1: CONFIGURATION MMMMMMM STATISTICS
CLEAR TIMERS:
DISABLE
MESSAGE
CLEAR START/TRIP
MESSAGE
COUNTERS: DISABLE
CLEAR INTERLOCK
MESSAGE
COUNTER: DISABLE
CLEAR ENERGY USED:
MESSAGE
DISABLE
4
PATH: SETPOINTS M S1: CONFIGURATION MMMMMMMM PROGRAMMABLE MESSAGE
PROGRAMMABLE MESSAGE
SAMPLE TEXT
MESSAGE
PATH: SETPOINTS M S1: CONFIGURATION MMMMMMMMM PREFERENCES
DEFAULT MESSAGE
DELAY: 10 s
MESSAGE
DEFAULT MESSAGE
MESSAGE
BRIGHTNESS: 60%
4-8
Range: ENABLE, DISABLE
Select ENABLE and press
A4: STATISTICS \ TIMERS.
Range: ENABLE, DISABLE
Select ENABLE and press
page A4: STATISTICS \ COUNTERS.
Range: ENABLE, DISABLE
Select ENABLE and press
A4: STATISTICS \ COUNTERS.
Range: ENABLE, DISABLE
Select ENABLE and press
page A1: DATA \ MOTOR DATA.
Range: 40 ASCII characters
Enter a 40 character message using the
keys. This message is displayed in A1: DATA \ PROGRAMMABLE MESSAGE.
Range: 3 to 300 seconds; Step: 1
The default message delay can now be adjusted with this setpoint.
Range: 0 to 100%; Step: 20%
The brightness of the MM3 display can now be adjusted when it is not in
use.
MM3 Motor Manager 3
STORE
to clear the timers on page
STORE
to clear the start and trip counters on
to clear the interlock counter on page
STORE
to clear the energy used (kWhrs) on
STORE
4.2.9 PROGRAMMABLE MESSAGE
VALUE
VALUE
,
4.2.10 PREFERENCES
GE Power Management
4 SETPOINTS
4.2.8 STATISTICS
, and
STORE