Performing Lcr Measurements - Keysight Technologies U1733C Quick Start Manual

Performing LCR Measurements

Auto Identification (Ai)
Press the
select an appropriate primary measurement
function (L, C, or R), secondary measurement
function (D, Q, or
(parallel or series) for the device-under-test.
The LCR meter powers up in the Ai mode by default.
NOTE
the Ai mode is enabled.
–
–
LCR measurement steps
8
button to automatically identify and
θ
is shown on the left of the display screen when
flashes when the LCR meter is identifying
a measurement function and mode.
Press again while
Ai mode.
Keysight U1731C/U1732C/U1733C Quick Start Guide
), and measurement mode
is shown to exit the