Siemens SCALANCE W1750D CLI Function Manual page 682

CLI Commands
4.20 W
Command/Parameter
rts-threshold
<threshold>
rx-ampdu-agg-disable
server-load-balancing
682
Description
Configures a threshold to trigger the
RTS/CTS handshake.
The RTS (Request to Send)/CTS (Clear
to Send) mechanism allows devices to
reserve the RF medium and minimizes
frame collisions introduced by the hid-
den stations. When RTS is enabled, a
higher number of retransmissions occur-
ring on the WLAN trigger the RTS/CTS
handshake and the transmitter station
sends an RTS frame to the receiver
station. The receiver station responds
with a CTS frame. Typically, the
RTS/CTS frames are not sent, unless
the packet size exceeds the RTS
threshold. By default, the RTS threshold
is set to 2333 octets.
When the size of the packets sent by
the transmitter exceeds the configured
threshold, RTS frames are sent.
When this parameter is disabled, APs
reject A- MPDU based aggregations in
the Add Block Acknowledgement re-
sponse frames.
Enables load balancing across two
RADIUS servers if two authentication
servers are configured for the SSID.
Range
0–2347
—
—
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
Default
2333
Enabled
Enabled