CLI Commands
4.20 W
no...
Parameter
ciphers
ssl-protocol
all
tlsv1
tlsv1.1
tlsv1.2
no...
Usage Guidelines
Use the web-server command to enable secure communication with the web server through
the TLS protocol.
Example
The following example shows how to enable TLS v1.0:
(scalance)(config)# web-server
(scalance)(web-server)# ssl-protocol tlsv1
(scalance)(web-server)# end
(scalance)# commit apply
Command Information
AP Platform
All platforms
4.20.3
wlan captive-portal
Description
This command customizes the appearance of the internal captive portal splash page of the
guest users.
664
Description
Configures the strength of the cipher suite:
high: encryption keys larger than 128 bits
•
low: 56 or 64 bit encryption keys
•
medium: 128 bit encryption keys
•
Enables SSL protocol for secure communication with the
web server.
Enables all versions of TLS protocol for secure commu-
nication with the web server.
Enables TLS v1 protocol.
Enables TLS v1.1 protocol.
Enables TLS v1.2 protocol.
Removes the configuration.
Command Mode
Configuration mode
Function Manual, 03/2019, C79000-G8976-C452-04
Range
Default
high,
high
medium,
low
—
all
—
—
—
—
—
—
—
—
—
—
SCALANCE W1750D CLI