Table of Contents
Advertisement
CLI Commands
4.16 S
Column
New Power
Reason
show ap arm neighbors
The show ap arm neighbors command displays the ARM settings on the AP neighbors. The
following example shows the output of the show ap arm neighbors command:
ARM Neighbors
-------------
bssid essid channel rssi tx-power PL (dB) AP Flags Last Update
----- ----- ------- ---- -------- ------- -------- ------------
6c:f3:7f:45:57:20 7SPOT 1 8 0 0 Passive
6c:f3:7f:56:7e:a0 7SPOT 1 9 0 0 Passive
6c:f3:7f:56:7e:a1 NTT-SPOT 1 12 0 0 Passive
00:24:6c:80:77:c1 NTT-SPOT 1 9 0 0 Passive
6c:f3:7f:45:57:21 NTT-SPOT 1 8 0 0 Passive
6c:f3:7f:44:91:11 NTT-SPOT 1 9 0 0 Passive
00:24:6c:2b:fd:e8 qa-mv-vap3 161 5 9 98 Passive
00:24:6c:80:4d:62 docomo 1 10 0 0 Passive
(Total updates)
---------------
Neighbor Summary:One hop 232 Two hop 0 Current Time: 2013-05-11 04:31:33
The output of this command includes the following information:
Column
bssid
essid
Channel
rssi
tx power
PL
AP Flags
Last Update
Total updates
show ap arm rf-summary
The show ap arm rf-summary command shows the statistics for all channels monitored by an
AP. The following example shows the output of the show ap arm rf-summary command:
Channel Summary
278
Description
Indicates power values configured on the AP after the ARM change.
Indicates the reason for changes in channels. For more information about
the reason, see the description below the command output.
Description
Indicates the BSSID of the AP neighbors.
Indicates the ESSID of the AP neighbors.
Indicates the channels assigned to the AP neighbors
Indicates the Received signal strength indication (RSSI) values associated
with the ARM channels to which AP neighbors are connected.
Indicates the transmission power.
Indicates power loss.
Indicates the status of AP neighbors.
Displays details of last updates if any.
Displays a summary if updates.
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
Advertisement
Table of Contents
