Siemens SCALANCE W1750D CLI Function Manual page 397

d8:c7:c8:cb:d4:20 10.17.88.188 5665
5.0 Voice Rejs 5.0 Video Rejs
-------------- --------------
0
The output of this command includes the following parameters:
Column
IP address
2.4 Reqs
5.0 Reqs
2.4 Voice Rejs
5.0 Voice Rejs
2.4 Voice Rejs
5.0 Voice Rejs
The following example shows the output of show aps power-monitor command:
(scalance)# show aps power-monitor
AP Power Monitoring information
-------------------------------
Name
----
70:3a:0e:cc:ef:02
70:3a:0e:cc:ec:b8
The output of this command includes the following information:
Column
Name
IP Address
Current(mW)
Average(mW)
Minimum(mW)
Maximum(mW)
The following output is displayed for the show aps sync command:
AP Sync List
------------
MAC IP Address Class Current Version
--- ---------- ----- ---------------
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
0
Description
Displays the Name of the AP.
Displays the IP address of the AP.
Displays the counters that indicate the number of scanning rejects due to
voice traffic.
Displays the counters that indicate the number of scanning rejects due to
voice traffic.
IP Address
----------
10.65.72.14
10.65.72.13
Description
Host name of the AP.
IP Address of the AP.
The current power consumption value, in mW.
The average power consumption value of APs sampled over the previous
one minute, in mW.
The minimum power consumption value of APs sampled over the previous
one minute, in mW.
The maximum power consumption value of APs sampled over the previous
one minute, in mW.
0 0
Current(mW) Average(mW) Minimum(mW) Maximum(mW)
----------- ----------- ----------- -----------
11564 11569
11603 11581
CLI Commands
4.16 S
5675
11516 11840
11488 12286
397