Siemens SCALANCE W1750D CLI Function Manual page 675

Command/Parameter
essid <essid>
external-server
explicit-ageout-
client
g-basic-rates
g-min-tx-rate <rate>
g-max-tx-rate <rate>
g-tx-rates
hide-ssid
high-efficiecny-
enable
high-efficiecny-
disable
hotspot-profile
<name>
inactivity-timeout
<interval>
index <idx>
l2-auth-failthrough
leap-use-session-key
legacy-support
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
Description
Defines a name that uniquely identifies
a wireless network.
Configures an external RADIUS server
for authentication.
Allows the AP to send a deauthentica-
tion frame to the client and clear client
entry.
Allows you to define a set of modulation
rates to use for the clients on the 2.4
GHz radio band.
Configures the specify the minimum
transmission rate for the 2.4 GHz band.
Configures the specify the maximum
transmission rate for the 2.4 GHz band.
Allows you to configure specific trans-
mission rate at which AP can transmit
data to the clients connected on 2.4
GHz band.
Hides the SSID. When enabled, the
SSID will not be visible for the users.
Enables the high effiency feature on
802.11ax devices
Disables the high effiency feature on
802.11ax devices
Associates a hotspot profile with the
WLAN SSID profile.
Configures a timeout value for the inac-
tive client sessions.
When a client session is inactive for the
specified duration, the session expires
and the clients are required to log in
again.
Assigns an index value for the SSID.
Allows the clients to use 802.1X authen-
tication when MAC authentication fails.
Allows the users to derive session keys
for Lightweight Extensible Authentica-
tion Protocol (LEAP) authentication.
Configure this command for old printers
that use dynamic WEP and if you do not
want use a session key from the
RADIUS Server to derive pair wise
unicast keys.
Enables the behaviour prior to enabling
wpa3 for wpa3-open and wpa3-sae-aes
opmodes
CLI Commands
Range Default
— —
— —
— Disabled
1,2,5,6,9,11,12,18, 1, 2
24,36,48,54
in Mbps
1,2,5,6,9,11,12,18, 1
24,36,48,54
in Mbps
1,2,5,6,9,11,12,18, 54
24,36,48,54
in Mbps
1,2,5,6,9,11,12,18, All
24,36,48,54
— Disabled
— Enabled
— —
— —
60-86400 seconds 1000
— —
— Disabled
— Disabled
— —
4.20 W
675