Siemens SCALANCE W1750D CLI Function Manual page 650

CLI Commands
4.19 V
Syntax
virtual-controller
country <country-code>
dnsip <addr>
ip <IP-address>
ipv6 <IPv6 address>
key <name>
vlan <virtual-controller-vlan> <virtual-controller-mask> <virtual-controller-
gateway>
no...
Parameter
country <country-code>
dnsip <addr>
ip <IP-address>
ipv6 <IPv6 address>
key <name>
vlan <virtual-controller-
vlan>
<virtual-controller-mask>
<virtual-controller-
gateway>
no...
Example
The following example configures a country code for an AP:
(scalance)(config)# virtual-controller-country US
(scalance)(config)# end
(scalance)# commit apply
The following example configures a DNS IP address for the virtual controller:
(scalance)(config)# virtual-controller-dnsip 192.0.2.2
(scalance)(config)# virtual-controller-ip 192.0.2.2
(scalance)(config)# virtual-controller-ipv6 10.17.154.132
(scalance)(config)# virtual-controller-key
541a271a01f722ac28c1f8cfcbc4529021bcfb130d4e59ac93
(scalance)(config)# virtual-controller-vlan 1961 255.255.255.240 10.17.196.17
(scalance)(config)# end
(scalance)# commit apply
650
Description
Defines the country of operation of an AP. Slave APs obtain country
code configuration settings from the master AP.
Configures the DNS IP address for the virtual controller.
Assigns an IP address for the virtual controller.
Assigns an IPv6 address for the virtual controller.
Defines a unique name for the virtual controller.
Associates a VLAN ID with the virtual controller.
Configures a subnet mask for the virtual controller.
Configures a gateway for the virtual controller.
Removes the configuration.
Function Manual, 03/2019, C79000-G8976-C452-04
SCALANCE W1750D CLI