Siemens SCALANCE W1750D CLI Function Manual page 671

Command/Parameter
a-max-tx-rate <rate>
a-min-tx-rate <rate>
a-tx-rate <rate>
accounting-server
<name>
adverstise-ap-name
air-time-limit <lim-
it>
auth-pkt-mac-format
{delimiter|upper-
case}
auth-req-thresh
auth-server <name>
auth-survivability
bandwidth-limit
<limit>
blacklist
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
Description
Configures the specify the maximum
transmission rate for the 5 GHz band.
Configures the specify the minimum
transmission rate for the 5 GHz band.
Allows you to configure specific trans-
mission rate at which AP can transmit
data to the clients connected on 5 GHz
band.
This command configures a server for
accounting purpose.
When enabled, the AP will broadcast
the AP Name information in the bea-
cons frames.
Configures an aggregate amount of
airtime that all clients using this SSID
can use for sending and receiving data.
Configures a delimiter and upper- case
characters in a MAC Address string of
authentication packet or the username
and password of the client.
The delimiter and upper-case parame-
ters in this command are available for all
authentication methods. And without the
mac- authentication-delimiter and mac-
authentication-upper-case configuration,
it works on the username and password
for
MAC Authentication.
Allows you to set a threshold for authen-
tication requests for the SSID profile.
Configures an authentication server for
the SSID users.
Enables the authentication survivability
feature.
NOTE: The authentication survivability
feature requires ClearPass Policy Man-
ager 6.0.2 or later, and is applicable
only when external servers
such as RADIUS are configured for the
SSID. When enabled, Scalance W au-
thenticates the previously connected
clients using EAP-PEAP authentication
even when connectivity to ClearPass
Policy Manager is temporarily lost. The
Authentication survivability feature is not
applicable when a RADIUS server is
configured as an internal server.
Configures an aggregate amount of
bandwidth that each radio is allowed to
provide for the connected clients.
Enables dynamic blacklisting of clients.
CLI Commands
Range Default
6,9,12,18,24,36,48 54
,54 in Mbps
6,9,12,18,24,36,48 6
,54 in Mbps
6,9,12,18,24,36,48 All
,54 in Mbps
— —
— —
— —
— —
— —
— —
— —
1—65535 —
— —
4.20 W
671