Table of Contents
Advertisement
Command/Parameter
temporal-diversity
tspec
tspec-bandwidth
temporal-diversity
termination
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
Description
Shows if the temporal diversity feature
has been enabled or disabled. When
this feature is enabled and the client is
not responding to 802.11
the AP attempts two hardware retries. If
the hardware retries are not successful,
it attempts software retries. When this
feature is disabled, the AP attempts only
hardware retries.
Allows the APs to prioritize time- sensi-
tive traffic such as voice traffic initiated
by the client.
Reserves the configured bandwidth for
prioritizing voice traffic when traffic
specification (TSPEC) is enabled.
Shows if the temporal diversity feature
has been enabled or disabled. When
this feature is enabled and the client is
not responding to 802.11 packets, the
AP attempts two hardware retries. If the
hardware retries are not successful, it
attempts software retries. When this
feature is disabled, the AP attempts only
hardware retries.
Configures the EAP portion of 802.1X
authentication on the AP, instead of the
RADIUS server.
When enabled, this command reduces
network traffic to the external RADIUS
server by terminating the authorization
protocol on the AP. By default, for
802.1X authorization, the client con-
ducts an EAP exchange with the
RADIUS server, and the AP acts as a
relay for this exchange. The AP by itself
acts as an authentication server and
terminates the outer layers of the EAP
protocol, only
relaying the innermost layer to the ex-
ternal RADIUS server.
Range
enable, disable
packets,
—
200–600000 Kbps
enable, disable
—
CLI Commands
4.20 W
Default
disable
—
2000 Kbps
disable
Disabled
685
Advertisement
Table of Contents
