Table of Contents
Advertisement
Syntax
time-range <name> {absolute start <startday> <starttime> end <endday> <endtime>|
periodic {{daily | weekday |weekend} <starttime> to <endtime> | <startday <starttime>
to <endday> <endtime>}
no time-range <name>
Command/Parameter
name
absolute start
{<startdate>
<starttime>} end
{<enddate>
<endtime>}
periodic {<startday>
<starttime>} to {<endday>
<endtime>}
periodic <daily> [<start-
time> to <endtime>]
periodic <weekday>
[<starttime> to <endtime>]
periodic <weekend>
[<starttime> to <endtime>]
no time-range <name>
Usage Guidelines
Use this command to create a time range profile using the SCALANCE W CLI. You can
create an absolute time profile to execute once during a specific date and time configured in
the profile or create a periodic profile to execute at regular intervals based on the periodicity
specified in the configuration. These time based profiles can be applied to existing SSIDs in
the AP.
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
Description
Enter the profile name for the time range profile.
The SSID is made available only during the specified date and time
range. Configure the following time range parameters:
startday—Enter the start date in the mm/dd/yyyy format.
•
tarttime—Enter the start time in the hh:mm format.
•
endday—Enter the end date in the mm/dd/yyyy format.
•
endtime—Enter the end time in the hh:mm format.
•
The availability of the SSID will be periodically changed based on
the time range set in the profile. Configure the following time range
parameters:
startday—Specify any day of the week from Monday to Sunday
•
starttime—Enter the start time in the hh:mm format.
•
endday—Enter the end day for the time range profile.
•
endtime—Enter the end time in the hh:mm format.
•
daily—The time range profile is applied on the SSID on a daily
•
basis.
starttime—Enter the start time in the hh:mm format.
•
endtime—Enter the end time in the hh:mm format.
•
weekday—The time range profile is applied only during the
•
weekday
starttime—Enter the start time in the hh:mm format.
•
endtime—Enter the end time in the hh:mm format.
•
weekend—The time range profile is applied only during the
•
weekend.
starttime—Enter the start time in the hh:mm format.
•
endtime—Enter the end time in the hh:mm format.
•
Removes the time range configuration.
CLI Commands
4.17 T
637
Advertisement
Table of Contents
