Table of Contents
Advertisement
CLI Commands
4.16 S
Parameter
UAPSD OverflowDrop
Last SNR
Last SNR CTL0
Last SNR CTL1
Last SNR CTL2
Last ACK SNR
Last ACK SNR CTL0
Last ACK SNR CTL1
Last ACK SNR CTL2
Last ACK SNR EXT0
Last ACK SNR EXT1
Frames Received
Rx Data Frames
Null Data Frames
Rx Mgmt Frames
PS Poll Frames
Rx<n>Mbps
.
Tx WMM
336
Description
Shows the number of packets dropped due to Unscheduled Automatic
Power Save Delivery (U-APSD) overflow.
Indicates the last recorded signal-to-noise ratio.
Indicates the signal-to-noise ratio for the last received data packet on the
primary (control) channel 0. This parameter is only displayed for APs
operating in 40 MHz mode.
Indicates the signal-to-noise ratio for the last received data packet on the
secondary (control) channel 1. This parameter is only displayed for APs
operating in 40 Mhz mode.
Indicates the signal-to-noise ratio for the last received data packet on the
secondary (control) channel 2. This parameter is only displayed for APs
operating in 40 MHz mode.
Indicates the signal-to-noise ratio for the last received ACK packet.
Indicates the signal-to-noise ratio for the last received ACK packet on the
primary (control) channel 0. This parameter is only displayed for APs
operating in 40 MHz mode.
Indicates the signal-to-noise ratio for the last received ACK packet on the
primary (control) channel 1. This parameter is only displayed for APs
operating in 40 MHz mode.
Indicates the signal-to-noise ratio for the last received ACK packet on the
primary (control) channel 2. This parameter is only displayed for APs
operating in 40 MHz mode.
Indicates the signal-to-noise ratio for the last received ACK packet on the
secondary (extension) channel 0. This parameter is only displayed for
APs operating in 40 MHz mode.
Indicates the signal-to-noise ratio for the last received ACK packet on the
secondary (extension) channel 1. This parameter is only displayed for
APs operating in 40 MHz mode.
Shows the number of frames received.
Shows the number of data frames received.
Shows the number of null data frames received.
Shows the number of management frames received.
Shows the number of power save poll frames received.
Shows the number of frames received at <n> Mbps, where <n> is a value
between 6 and 300.
Shows the number of Wi-Fi Multimedia (WMM) packets transmitted for
the following access categories. If the AP has not transmitted packets in a
category type, this data row will not be displayed in the output of the
command.
Tx WMM [BE]: Best Effort
Tx WMM [BK]: Background
Tx WMM [VO]: VoIP
Tx WMM [VI]: Video
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
Advertisement
Table of Contents
