Table of Contents
Advertisement
Syntax
show ap debug dhcp-packets [<mac>]
Parameter
<mac>
Usage Guidelines
Use this command to view information about the DHCP packets trace information for an AP.
You can view DHCP information only when the dhcp-option parameter is configured with the
set-vlan or set-role rule.
Example
The following example shows the output of show ap debug dhcp-packets command:
Traced Dhcp Packets
-------------------
Timestamp Mtype Htype Hops TID Cip Yip Sip Gip Cmac
--------- ----- ----- ---- --- --- --- --- --- ----
The output of this command includes the following parameters:
Column
Timestamp
Mtype
Htype
Hops
TID
Cip
Yip
Sip
Gip
Cmac
Command Information
AP Platform
All platforms
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
Description
Indicates the AP's MAC address.
Description
Displays the timestamp for DHCP packets.
Indicates the message type.
Indicates the hardware address type
Shows the number of hops.
Shows the transaction ID.
Indicates the client IP address.
Indicates the IP address of the AP.
Indicates the source IP address from which the DHCP packets originated.
Indicates the Gateway IP address.
Indicates the MAC address of the client.
Command Mode
Privileged EXEC mode
CLI Commands
4.16 S
341
Advertisement
Table of Contents
