Siemens SCALANCE W1750D CLI Function Manual page 681

Command/Parameter
radius-reauth-
interval
<minutes>
rf-band <band>
rrm-quiet-i
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
Description
Allows you to configure an interval after
which the APs can redo the RADIUS
transaction to reauthenticate clients.
If the reauthentication interval is config-
ured:
On an SSID performing L2 authenti-
•
cation (MAC or 802.1X authentica-
tion): When reauthentication fails,
the clients are disconnected. If the
SSID is performing only MAC au-
thentication and has a pre- authenti-
cation role assigned to the client, the
client will get a post-authentication
role only after a successful reau-
thentication. If reauthentication fails,
the client retains the pre- authentica-
tion role.
On an SSID performing both L2 and
•
L3 authentication (MAC with captive
portal authentication): When reau-
thentication succeeds, the client re-
tains the role that is already
assigned. If reauthentication fails, a
pre- authentication role is assigned
to the client.
On an SSID performing only L3
•
authentication (captive portal au-
thentication): When reauthentication
succeeds, a pre-authentication role
is assigned to the client that is in a
post-authentication role. Due to this,
the clients are required to go
through captive portal to regain ac-
cess.
Configures the radio frequency band on
which this SSID will be broadcast. You
can select either 2.4GHz, 5 GHz, or all
to specify both bands.
Configures a radio resource manage-
ment IE profile to define the information
elements advertised by an AP.
CLI Commands
Range Default
Any integer value —
in minutes
2.4 GHz, 5 GHz, —
all
— —
4.20 W
681