Siemens SCALANCE W1750D CLI Function Manual page 451

Parameter
dns-ip-learning
mcast
nat-pool <ID>
route
sbr
session
{ucc|dpi<verbose>]
statistics
user
vlan
vlan-mcast
vlan-port-mapping
Usage Guidelines
Use this command to display various datapath statistics for debugging purposes.
Example
show datapath acl
The following example shows the output of show datapath acl command.
Datapath ACL 3 Entries
-----------------------
Flags: P - permit, L - log, E - established, M/e - MAC/etype filter
S - SNAT, D - DNAT, R - redirect, r - reverse redirect m - Mirror
I - Invert SA, i - Invert DA, H - high prio, O - set prio, C - Classify Media
A - Disable Scanning, B - black list, T - set TOS, 4 - IPv4, 6 - IPv6
----------------------------------------------------------------
show datapath acl-all
The following example shows the output of show datapath acl-all command.
ACL Name {magic-vlan} Number
{106}
01:00
02:00
03:00
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
Description
Displays the list of IP addresses learned by the Wi-Fi client during the
DNS learning phase
Displays multicast table statistics for the AP.
Displays the contents of the datapath NAT entries table. It displays NAT
pools as configured in the datapath. Statistics include pool, SITP start,
SIP end and DIP.
Displays datapath route table statistics.
Displays the destination servers that are reachable through a particular IP
address.
Displays datapath session statistics.
Displays datapath station association table statistics.
Displays datapath user statistics such as current entries, pending deletes,
high water mark, maximum entries, total entries, allocation failures, inva-
lid users and maximum link length.
Displays VLAN table information such as VLAN memberships inside the
datapath including L2 tunnels which tunnel L2 traffic.
Displays the multicast table statistics for the AP.
Displays the user VLAN details for the AP.
any any
192.168.10.0 255.255.254.0 192.168.10.0
192.168.10.0 255.255.254.0 224.0.0.0 224.0.0.0
17 0-65535 8209- P4
8211
255.255.254.0 any
P4
any P4
CLI Commands
4.16 S
451