Siemens SCALANCE W1750D CLI Function Manual page 524

CLI Commands
4.16 S
Mcasts ARP Proxy Pkts Tx Jumbo MTU Rx HB Tx HB MTU Reqs MTU Resps HB Mismatch IP
Mismatch Type
Vlan Translations
------------- --------------- ------- ------- --------- ---------- ---------- -------
-- ------
--- -------------- -------- --- ----- ----- -------- --------- ----------- ----------
- ---- --
---------------
The output of this command provides the following information:
Parameter
L3 Mobility Datapath
Home Table
L3 Mobility Datapath
Foreign Table
L3 Mobility Datapath
Tunnel table
show l3-mobility events
The following example shows the output of the show l3-mobility events command:
524
Description
Displays details such as client index, client MAC address, VLAN, destina-
tion device associated with the L3 mobility home subnet.
Displays details such as client index, client MAC address, VLAN, Destina-
tion device, home AP IP address, Virtual Controller IP address and packet
details associated with the L3 mobility foreign subnet.
Displays the following details about L3 mobility tunnel:
Tunnel - Indicates the tunnel interface.
•
Device - Displays the device ID.
•
Remote Protocol - Indicates the remote protocol used by the roaming
•
clients.
Dest IP - Indicates the destination IP address to which the packets are
•
routed.
Clients - Displays the list of clients
•
Idle Time - Displays the idle time
•
Rx Packets - Displays information about packets received.
•
Tx Packets - Displays information about packets transmitted.
•
Rx Mcasts - Displays information about multicast packets received.
•
Tx Mcasts - Displays information about multicast packets transmitted.
•
ARP Proxy Pkts - Displays information packets resolved to destination
•
IP address by the proxy Address Resolution Protocol (ARP)
Tx Jumbo MTU - Displays information about the Maximum Transmis-
•
sion Unit (MTU) in jumbo frames.
Rx HB
•
Tx HB
•
MTU Reqs - Indicates the number of MTU requests sent.
•
MTU Resps - Indicates the number of MTU responses received.
•
HB Mismatch
•
IP Mismatch - Indicates IP address mismatch if any
•
Type
•
Vlan Translations - Displays details about VLAN translation
•
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04