Table of Contents
Advertisement
Parameter
<gateway>
<metric>
no...
no routing- profile
Usage Guidelines
Use this command to configure a routing profile for a specific destination address or
destination subnet.
Example
The following example configures a routing profile:
(scalance)(config)# routing-profile
(scalance)(Routing-profile)# route 192.0.1.0 255.255.255.0 192.0.2.0 15
(scalance)(Routing-profile)# end
(scalance)# commit apply
Command Information
AP Platform
All platforms
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
Description
Specify the gateway to which traffic must be routed. This IP address must
be the controller IP address on which the VPN connection is terminated.
This is an optional field and is configures a metric for the datapath route
from source to destination. The default metric value is 15.
Removes configuration settings for parameters under the routing-profile
command.
Removes the routing profile configuration.
Command Mode
Configuration mode and routing profile configuration sub-mode.
CLI Commands
4.15 R
237
Advertisement
Table of Contents
