Siemens SCALANCE W1750D CLI Function Manual page 676

CLI Commands
4.20 W
Command/Parameter
local-probe-req-
thresh
<threshold>
mac-authentication
mac-authentication-
delimiter <delim>
mac-authentication-
upper-case
max-authentication-
failures <limit>
max-retries
mdid
mfp-capable
mfp-required
max-clients-threshold
<threshold>
676
Description
Configures a Received signal strength
indication (RSSI) threshold value to limit
the number of incoming probe requests.
When enabled, this command controls
the system response to the broadcast
probe requests sent by clients to search
for the available SSIDs and ignores the
probe request if required,
Enables MAC authentication for clients
that use this SSID profile.
Allows you to set a delimiter that can be
used in the MAC address string for MAC
authentication.
You can specify colon or dash for delim-
iter. If the delimiter is not specified, the
MAC address in the xxxxxxxxxxxx for-
mat is used. If you specify colon for the
delimiter, the MAC addresses in the
xx:xx:xx:xx:xx:xx format are used.
Enables the AP to use uppercase letters
in MAC address string for MAC authen-
tication.
Configures the maximum number of
authentication failures to dynamically
blacklist the users.
The users who exceed the number of
authentication failures configured
through this command are dynamically
blacklisted.
Denotes the maximum number of retries
the AP attempts when the client is not
responding to the 802.11 frames.
Denotes the mobility domain identifier.
An AP uses this parameter to announce
that it is a part of the AP group that
constitutes a mobility domain.
When enabled, the SSID supports man-
agement frame protection (MFP) capa-
ble clients and non-MFP clients.
When enabled, the SSID supports only
the clients that exhibt the
MFP functionality
Configures the maximum number of
clients for a BSSID on a WLAN.
Range
0-100 dB
—
colon or dash
—
—
1–128
1-65535
—
—
0-255
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
Default
—
Disabled
—
—
—
8
Disabled
Disabled
Disabled
64