Table of Contents
Advertisement
Usage Guidelines
The output of the show ap bss-table command shows the Siemens AP BSS table for all APs.
To filter this information and view BSS table data for an individual AP or a specific port and
slot number, include the ap-name, bssid, essid, ip-addr or port keywords.
Example
The following example shows the output of show ap bss-table command:
Siemens AP BSS Table
------------------
bss ess port ip phy type ch/EIRP/max-EIRP cur-cl ap name in-t(s) tot-t
--- --- ---- -- --- ---- ---------------- ------ ------- ------- -----
d8:c7:c8:3d:42:12 example1 ?/? 10.17.88.188 a-HT ap 149+/20/22.5 1 d8:c7:c8:cb:d4:20
0 18h:13m:58s
d8:c7:c8:3d:42:13 example-local-nw ?/? 10.17.88.188 a-HT ap 149+/20/22.5 0
d8:c7:c8:cb:d4:20 0 18h:13m:58s
d8:c7:c8:cb:d4:21 wired eth1 ?/? 10.17.88.188 b ap 0/0/0 0 d8:c7:c8:cb:d4:20 0
18h:13m:59s d8:c7:c8:3d:42:02 example1 ?/? 10.17.88.188 g-HT ap 7/21.5/21.5 0
d8:c7:c8:cb:d4:20 0 18h:13m:58s
d8:c7:c8:3d:42:03 example-local-nw ?/? 10.17.88.188 g-HT ap 7/21.5/21.5 0
d8:c7:c8:cb:d4:20 0 18h:13m:58s
Channel followed by "*" indicates channel selected due to unsupported configured
channel. "Spectrum" followed by "^" indicates Local Spectrum Override in effect.
Num APs:5
Num Associations:1
The output of this command includes the following information:
Column
bss
ess
port
ip
phy
type
ch/EIRP/max-EIRP
cur
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
Description
Displays tthe AP BSSID. This is usually the MAC address of the AP.
Displays the AP ESSID.
Displays port of an AP.
Displays the IP address of an AP.
Displays an AP radio type. Possible values are:
a—802.11a
•
a-HT—802.11a high throughput
•
g— 802.11g
•
g-HT—802.11g high throughput
•
DescriptionShows whether the AP is working as an access point or AM.
Displays the radio channel used by the AP or current EIRP or maximum EIRP
Displays the current number of clients on the AP.
CLI Commands
4.16 S
285
Advertisement
Table of Contents
