Siemens SCALANCE W1750D CLI Function Manual page 687

Simatic net industrial wireless lan
Table of Contents

Advertisement

Command/Parameter
vlan
vht-mu-txbf-disable
vht-supported-mcs-map
vht-supported-mcs-map
vlan <vlan>
very-high-throughput-
disable
wep-key <wep-key>
wispr
wmm-background-dscp
<dscp>
wmm-background-share
<share>
wmm-best-effort-dscp
<dscp>
wmm-best-effort-share
<share>
wmm-uapsd-disable
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
Description
Configures a VLAN name orVLAN ID in
the SSID profile.
Disables MU-MIMO. The MU- MIMO
feature allows the 802.11ac Wave 2
APs to send multiple frames to multiple
clients simultaneously over the same
frequency spectrum. With MU- MIMO,
APs can support simultaneous direc-
tional RF links and up to four simultane-
ous full-rate Wi-Fi connections (For
example, smart phone, tablet, laptop,
multimedia player or other client de-
vice). The MU-MIMO feature is enabled
by default on WLAN SSIDs.
Allows you to define a combination of
VHT MCS and spatial streams as a VHT
MCS rate set.
Disables VHT TX beamforming on the
200 Series Series access points. This
feature is available only on the 200
Series access points.
Allows you to assign a unique VLAN ID
or a VLAN name to a specified SSID
user. The AP takes this parameter from
its per AP vlan specific configuration.
Disables very high throughput (VHT) for
clients connecting the WLAN SSID
profile.
Static WEP key associated with the key
index. The WEP keyvalues can be 10 or
26 hexadecimal characters in length.
Enables WISPr authenticationfor the
SSID profile.
Allows you to specify the DSCP map-
ping value for the background traffic.
Allocates bandwidth for background
traffic such as file downloads or print
jobs.
Allows you to specify the DSCPmapping
value for the besteffort traffic.
Allocates bandwidth or best effort traffic
such as traffic from legacy devices or
traffic from applications or devices that
do not support
QoS.
Disables Unscheduled Automatic Power
Save Delivery (UAPSD) on all WMM
access categories (ACs).
By default, UAPSD or WMM power save
is enabled.
CLI Commands
Range
Default
-, 7, 8, 9
9 for each
spatial
stream
1 - 4095
0—63
0—63
4.20 W
687

Advertisement

Table of Contents
loading

Table of Contents