Table of Contents
Advertisement
CLI Commands
4.1 A
Command/Parameter
report-interval
<interval>
restriction-timeout
slb-mode <mode>
snr-thresh <snr>
vbr-entry-age <age>
error-rate-
threshold <percent>
error-rate-wait-
time <secs>
free-channel-index
<idx>
g-channels <g-
channel>
ideal-coverage-
index
max-tx-power <pow-
er>
54
Description
Configures the report interval of VBR on each
AP.
Configures the timeout interval during which
non- target AP will not respond to a specific
client.
Configures a balancing strategy for client
match. The applicable values are:
1 - Channel-based
•
2 - Radio-based
•
3 - Channel and Radio based
•
The snr value of the Client RSSI must be
higher than the current AP for a potential
target AP.
Denotes the the aging time for stable
VBR entries.
Configures the minimum percentage of errors
in the channel that triggers a channel change.
Configures the time that the error rate has to
be at least equal to the error rate threshold to
trigger a channel change. The error rate must
be equal to or more than the error rate
threshold to trigger a channel change.
Checks the difference in threshold in the
channel interference index between the new
channel and the existing channel. An AP will
only move to a new channel if the new chan-
nel has a lower interference index value than
the current channel. This parameter specifies
the required difference between the two inter-
ferenc e index values before the AP moves to
the new channel. The lower this value, the
more likely it is that the AP will move to the
new channel.
Configures 2.4 GHz channels.
Specifies the ideal coverage index that an AP
tries to achieve on its channel. The denser the
AP deployment, the lower this value should
be.
Sets the highest transmit power levels for the
AP. If the maximum transmission EIRP
configured on an AP is not supported by the
AP model, the value is reduced to the highest
supported power setting.
NOTE: Higher power level settings may be
constrained by local regulatory requirements
and AP capabilities.
Range
0 - 3600
1 - 255
1 - 3
0 - 100
1 - 3600
0 - 100
1 - 3600
—
—
2 - 20
0 - 127dBm
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
Default
30
10
1
10
300
70
90
25
—
10
127
Advertisement
Table of Contents
