Siemens SCALANCE W1750D CLI Function Manual page 677

Command/Parameter
multicast-rate- opti-
mization
mpdu-agg-disable
okc
openflow-enable
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
Description
Allows the AP to select the
optimal rate for sending broadcast and
multicast frames based on the lowest of
unicast rates across all associated cli-
ents.
When enabled, the multicast traffic can
be sent at the rate of 1- 24 Mbps. The
default rate for sending frames for 2.4
GHz is 1 Mbps and 5.0 GHz is 6 Mbps.
Disables MAC Protocol Data Unit
(MPDU) aggregation
Enables opportunistic key caching
(OKC).
In the OKC based roaming, the AP
stores one pairwise master key (PMK)
per client, which is derived from last
802.1X authentication completed by the
client in the network. The cached PMK
is used when a client roams to a new
AP to allow faster roaming of clients.
NOTE: If the wireless client (the 802.1X
supplicant) does not support this fea-
ture, a complete 802.1X authentication
is required whenever it roams to a new
AP. OKC is supported on WPA2-AES
Enterprise network only.
Configures OpenFlow to an AP.
CLI Commands
Range Default
— Disabled
— —
— Disabeld
— —
4.20 W
677