Table of Contents
Advertisement
Command/Parameter
set-role
{{contains|ends-with|
equals|matches- regu-
lar-expression| not-
equals|starts- with}
<operand>
<role>|value-of}
set-role-by-ssid
set-role-mac-auth
<mac-only>
set-role-machine-auth
<machine_only>
<user_only>
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
Description
Assigns a user role to the clients. The
first rule that matches the configured
condition is applied.
You can set any of the following
•
conditions:
contains—The rule is applied only if
•
the attribute value contains the
specified string.
ends-with—The rule is applied only
•
if the attribute value ends with the
specified string.
equals—The rule is applied only if
•
the attribute value is equal to the
specified string.
not-equals—The rule is applied only
•
if the attribute value is not equal to
the specified string.
starts-with—The rule is applied only
•
if the attribute value begins with the
specified
string.
•
value-of - This rule sets the user role
•
to the value of the attribute returned.
To set a user role, the value of the
attribute must already be configured
on the AP.
matches-regular-expression— The
•
rule is applied only if the attribute
value matches the regular expres-
sion pattern specified in
This operator is available only if the
mac-address-and-dhcp- options at-
tribute is selected in the Attribute
drop-down.
Configures a user role based on the
type of SSID configured.
Configures a MAC authentication-based
user role.
Configures a machine
authentication rule.
You can assign different rights to clients
based on whether their hardware device
supports machine authentication.
Machine authentication is only support-
ed on Windows devices, so this can be
used to distinguish between Windows
devices and other devices such as
iPads.
Range
—
Operand
.
—
—
—
—
CLI Commands
4.20 W
Default
—
—
—
—
—
683
Advertisement
Table of Contents
