Table of Contents
Advertisement
7.
Other Settings
7.1.
Joystick Range of Motion Adjustment
7
The range of motion can be adjusted.
By adjusting the range of motion, the maximum speed of the wheelchair can be reached even
when the range of motion is set to the narrow setting.
(1)
Setting Method
Purpose of Operation
[Preparation]
[1]
Prepare to adjust the range
of motion.
[Range of Motion]
[2]
Enter the adjustment mode.
[Range of Motion Input]
[3]
Operate the joystick to
input the range of motion.
78
Operation Method
Stop the wheelchair in a stable
state, engage the parking brake,
and power OFF.
While tilting the joystick forward,
turn on the power.
Power switch
Error "C2" will be displayed, then
flip the speed switch up and down
several times.
Continue this operation until the
range of motion input screen shown
to the right is displayed.
Speed switch
Within the possible operation range,
tilt the joystick forward and slowly
make 2 clockwise rotations, and
then release your hand from the
joystick.
Parameter Status during Operation
and Its Meaning
Off
Range of motion input screen
Advertisement
Table of Contents
