Table of Contents
Advertisement
Purpose of Operation
[Joystick Dead Zone]
Set the size of the dead
zone for the joystick
operation.
The dead zone is "the
[13]
range in which the
wheelchair does not move"
from when the user starts
to tilt the joystick until the
wheelchair begins to move.
Operation Method
If the desired parameter is blinking,
the following operation is not
necessary.
If a different parameter is blinking,
briefly flip the speed switch up or
down until the desired parameter is
blinking.
The buzzer sounds briefly only when
a setting has been changed.
You can redo this as many times as
Speed switch
you wish.
Briefly tilt forward
once.
Parameter Status during Operation
and Its Meaning
Narrow (50% of standard)
Standard (default setting)
Slightly wide
(150% of standard)
Wide (200% of standard)
Very wide
(300% of standard)
Briefly tilt toward
you once.
6
71
Advertisement
Table of Contents
