decon E-Drive PLUS Service Manual page 81

(2) Canceling Method
Purpose of Operation
[Preparation]
Prepare to cancel the
[1]
setting for the anti-tamper-
ing function.
[2] [Start Operation]
[Canceling the Anti-tam-
[3]
pering Function Setting]
* If the buzzer sounds when the horn switch is pushed, the operation was not completed successfully. Hold down
the speed switch again and repeat the procedure.
Operation Method
Stop the wheelchair in a stable
state, engage the parking brake,
and power OFF.
1 When the power switch is turned
on, the screen shown to the right
is displayed.
Power switch
1 Hold the speed switch up.
2 Once the buzzer beeps, release
your hand from the switch.
Horn switch
3 Immediately push the horn switch
long.*
4 Confirm that the cancellation of
the anti-tampering function
setting is complete on the LCD
and release your finger.
Parameter Status during Operation
and Its Meaning
Off
Anti-tampering function setting screen
Normal screen
7
81