4.4. Hand Rim Replacement (20", 22", and 24" Models)
4.4.1. Hand Rim Removal
1
Remove the 6 bolt caps.
2
Loosen the bolts with a wrench and remove the
hand rim.
Do not lose the collars, plain washers, and
spring washers because they will be used for the
installation.
4.4.2. Hand Rim Installation
1
Temporarily tighten at the 6 locations shown in
the right diagram. Be sure to use the supplied
bolts (with thread-locking agent applied).
2
Tighten the bolts.
Tightening torque: 4 to 5 Nm
Hand rim
Hand rim
Bolt cap
Plain washer
Bolt
Spring
washer
Collar
4
43