Related Manuals for decon Liberty LBM7013
Summary of Contents for decon Liberty LBM7013
- Page 1 Assembly Instructions LBM7013, LBM7113, LBM7213 Liberty Mounting set Etac Cross 6 / Cross 6 Long 2022-03 Revision 1...
-
Page 2: General Instructions
Liberty. Warnings Assembly work or changes made to the mounting set must be carried out by trained service technician, reseller or another person assigned by Decon. __________________________________________________________________________________ Sida 2/9... - Page 3 Mounting set LBM7013, LBM7113, LBM7213 __________________________________________________________________________________ 2. Overview D E F Item number Qty. Description Center pipe Outer pipe Clamp Holder adapter bar QR-Pin Adapter plate Spacer adapter plate front Spacer adapter plate rear Washer adapter plate Screw M6x55 countersunk Spring washer M6 Dome nut M6 Screw M6x14 countersunk...
- Page 4 Mounting set LBM7013, LBM7113, LBM7213 __________________________________________________________________________________ 3. Assembly and adjustment of adaptor First mount the adapter plate (F), spacer adapter plate (G & H), washer adapter plate (I). The kit includes 2 of each type of distance adapter plates/side, front and rear type.
- Page 5 Mounting set LBM7013, LBM7113, LBM7213 __________________________________________________________________________________ INFO The position of the wheelchair´s rear wheels can affect the position of the screws (J) and holder adapter bar (D). The positioning of the assembly that pictures are showing can vary depending on the position of the rear wheels of the wheelchair.
- Page 6 Mounting set LBM7013, LBM7113, LBM7213 __________________________________________________________________________________ There are two types of assembly tools. The old version where the complete spirit level is shown and one new version where the front part of the spirit level is hidden. When using the old version make sure that the bubble in the spirit level sits on the lines of the back part of the spirit level (marked on the pictures bellow with a rectangle).
- Page 7 Mounting set LBM7013, LBM7113, LBM7213 __________________________________________________________________________________ WARNING! The screws holding the clamps (C) shall be tightened to 7-9Nm of torque. Alt.2 Using the adjustment tool that is included in the delivery of Liberty (not this mounting set), set the angle of the adaptorbar. Only mount the inner pipe on one side and then rotate the center pipe to the correct angle.
- Page 8 Mounting set LBM7013, LBM7113, LBM7213 __________________________________________________________________________________ With a measuring tape the height between the ground and the upper docking pin of the adapter bar is measured. This will be used later when assembling Liberty. Now read the assembly instructions that was included in the delivery of the Liberty unit.
- Page 9 Decon Wheel AB Södra Ekeryd 119, SE-314 93 Hyltebruk, Sweden Tel: +46 (0)345 40880 Fax: +46 (0)345 40895 E-mail: info@decon.se...